Bolling No. 1M Intensive Mixer, 32 lb. Batch, Water Colled Steam Heated, Mixer Body S/N 14255 GE Motor 250 HP 1150/1700 rpm, 500 Volts, Lufkin Gearbox S-189-8 Mixer last inspected by Kobelco Stewart Bolling in March 2007. States! This Mixer is in VERY good condition with very low hours on Mixer, Selling Price includes Loading on your Truck

Eagle HT Digital Temperature Controls for Rheometers, and Mooneys. New Temperature Probes. AC 115V/120V/-60Hz

Monsanto R 100 Rheometer, Tech Pro Digital Temperature Controls, Therm O Logger Chart Recorder, 120 Volts, Tested and in Excellent condition, All Cables and Manual included, Ready to ship

Farrel Mill, 6" x 12" Rolls, Flip up Guides, Micro Roll Nip Adjustment, Twin 5 HP Drives, Variable Speeds and Friction, All New Electrical Wiring with operator station, New Starters, New knee Safeties front and back and overhead Cable,

Farrel Lab Mill, 6"x13" Rolls, 2 - Variable speed 5 HP AC Motor, Variable Friction and Speed, Flip up Guides, Precision Roll Nip Adjustment, Scraper Bar Front and Back, Emergency Knee Stop on Both Sides & Overhead Cable Stop, Ready to inspect or ship:

Mixer: Rotors, 2 Wing with Stellite tips and ends, chrome body cored for cooling or heating, Tip to side clearance within new spec, tips well defined: Drop door type Rotac rotary actuator, Chrome Door top, Dust Seals FYH type: Floating weight cylinder 16" diameter, Neck extension 12", Unidrive Gear Reducer Type Heavy Duty, Two Speed induction motor, H.P: 600/300, RPM: 900/450, Volts: 480,3 phase, 60 Hz: Ancillarys Include, Lube oil pump, Manual Mixer Controls, Hydraulic power unit

Farrel F-80 Banbury Chamber, 2 wing rotors, FYH Dust Stops

3 Liter MIXMAX Internal Tilt Mixer, 10 HP AC Drive, 2 Wing Rotors, 110 Degree Tilt Discharge, Leak-proof, Oil-less Dry Mechanical Dust Rings, Mixer is very easy to clean for color changes or to eliminate cross contamination . Excellent Condition

Shaw Intermix K-1 Mixer, Semi-Unidrive, Intermeshing Rotors, Roller Bearing, Batch Size 6.5 Liter, Shop order # 5558, Dated 9/71, Rotors in Excellent Concition, Mounted on Single Base.

Reconditioning Farrel BR Banbury Lab Mixer, 2.67 lb., 1.6 liter Capacity, Roller Bearing, Trabon Lubrication, 25 HP AC Motor, 480 Volts/3 Phase, 4 Speed Drive, Batch Timer, Air cylinders to open front Hopper door, All New water Valving, New Temperature Recorder with Digital display All New Electrical Wiring with New Control Buttons, Mixing Chamber in Very Good Condition,

Stewart Bolling Lab Mixer, Size OM, 4.0 liter net volume, 6.6 lbs.approx batch size at 1.0 Specific Gravity, Mixer side equiped with quick opening pneumatic Discharge door, 40 HP Variable speed Drive

Wabash Self contained Hydraulic Press, 75 Ton clamping force, One Press has 6-24" X 24" Electric Platens, One has 4-24" X 24" Electric Platens Water Cooled, each 7" daylight, Digital Temperature Controls, PLC, All Manuals, Mint Condition, Ready to Ship

4 Post Rubber Press, 3 Alike, 190 Ton Rated @ 2500 PSI, 14" Diameter Ram, 25" x 27" ELECTRIC PLATENS, 12" STROKE, 3.5" PUSH BACK CYLINDERS, As is. Priced to Sell

6- Alike 18" x 18" Rubber Lab Press, Electric Platens, 100 Ton, Self Contained 7.5 HP Hydraulic unit.480 Volts/ 3Phs.

Electric Platens Self Containd Wabash Press

Monsanto T-10 Load Cell, 2,200 lbf. Tension Excellent Condition

Monsanto T-10 Tensile Tester, Extensometer, Pneumatic Grips, 220 lb. Load cell. Computer Port, Complete Manuals, Total Travel 40", 110V, 60 Hz. Good Condition.

Monsanto R 100 Rheometer ODR Monsanto Therm0-Logger Recorder, all cables and Manual 120 Volts /1 ph / 60 hz / 20 Amps

Monsanto Mooney Viscometer, Model 1500, Completly reconditioned, New Software and Computer, All Cables, Complete with Manuals, Like New Condition

Monsanto Rheometer R-100,110V/15A/60HZ/1PH, Cables, Operating Manuals, Therm-O Logger recorder or New Computer & ALPHA Software offered Separatly, Excellent Condition.

Monsanto R-100 Rheometer with Thermologger Recorder, Tech Pro Digital Temperature Controller All Cables and Manuals, Rheometer has been tested and is in very good condition.

NRM 1 1/2" Lab Extruder, 5 HP Motor with Reeves Drive, 220 Volts/3 phase, Was used in Lab for Silicone Trials, Good Condition

VMI-AZ 70 MM Extruder, Gmbh-VMI Group, Type MCTD 70 mm, Order 1.94.052, Unit # 588, 12/1 L/D, Hydraulic Drive Power Roll Feed, Reliance RPM AC 60 Hp Motor, 460 Vols,3 ph, 60 Htz, 77 amps, 1725 RPM-Max safe Speed 5000 RPM New in 1995

VMI-AZ 120 mm extruder, Gmbh-VMI Group, Type MCTD 120 mm, 12/1 L/D, Order 1.94.053, Unit 598, Hydraulic Drive Power Roll Feed, Reliance RPM AC 100 Hp Motor, 460/Volts/60Htz/3ph Extruder was New in 1995, Excellent Condition

4 1/2" NRM Extruder

Haake Transfermix Extruder, 1.25" Screw, 4 Heating zones

10 Hole Aluminum Aging Block Ovens, Model 10-2H, West 6100 Digital Controller, Preset High Temperature Safety Overload, 110 Volts. 10 Test Tubes and Corks. Testing for Both ASTM D-471 for Liquid Aging, and ASTM D-865 for Air Aging, In Stock Ready to ship.

Westinghouse Two Speed Motor, 300/150 HP, 890/445 RPM, 460 Volts, 3 phase, 60 Hz, 370 Amps, Type CS, Class F, Code G/J, S.F. 1.15, Model #71F13813, Serial # 08238801, Frame Type 686.5S, Overall Dimensions: 64" F/B X 64" R/L X 45" Tall, Approx Wt. 5000 lbs.

WEATINGHOUSE 400 HP MOTOR, RPM 585, 460 Volts,3 Ph, 60 Hz, Frame 6806L, Code-F, 1.15 Service Factor, Model HS DP, REBUILT NEVER USED, READY TO SHIP

Set of New 6" X 12" Lab Mill Rolls Chromed, Cored and Still in crate