Bolling No. 1M Banbury Intensive Mixer, 32 lb. Batch, 2 Wing Rotors, Chrome Rotors, Mixer Body S/N 14255 GE Motor 250 HP 1150/1700 rpm, 500 Volts, Lufkin Gearbox S-189-8 Mixer last inspected by Kobelco Stewart Bolling, States! This Mixer is in VERY good condition with very low hours on Mixer.

New 3 Liter MIXMAX Internal Tilt Mixer, 15 HP Variable Speed Drive, 2 Wing Rotors, 110 Degree Tilt Discharge, Leak-proof Oil-less Dry Mechanical Dust Rings, Mixer is very easy to clean for color changes or to eliminate cross contamination . Excellent Condition

Stewart Bolling Lab Banbury Mixer, 2 Wing Rorors, Size OM, 4.0 liter net volume, 6.6 lbs.approx batch size at 1.0 Specific Gravity, Mixer sides equiped with quick opening pneumatic Discharge door, 40 HP Variable speed Drive, New ABB Drive, New Chart Recorder, New RPM Tac and New Digital Temperature Display. Ready to Test run your Product or Inspect anytime.

Goodrich Cut and Chip, Specimen Rotation 200-1000 RPM, 110 V/ 60 Hz 1 PH 20 Amp, wt. 146 lbs. Wheel Mold Included Like New condition!

Model #W200P,20cm X 20cm X 56cm. Electrically heated Rolls, anti friction bearings. Mounted on cabinet type base. Motor starter and controls included.

Farrel Lab Mill, 8"x16" Rolls, Variable speed and Friction Two 10 HP AC Motor, Variable Friction and Speed, Flip up Guides, Precision Roll Nip Adjustment, Scraper Bar Front and Back, Emergency Knee Stop on Both Sides & Overhead Cable Stop, Ready to inspect or ship:

Farrel F-80 Banbury Chamber, 2 wing rotors, FYH Dust Stops

Eemco 4 Post Press, 24" X 24" Steam Platens, 18" Ram, 14" Daylight, Push Back Cylinders, 4 1/2" Posts, 47" working Heighth, 87" Total Height, Very good Condition

4 Post Rubber Press, 3 Alike, 190 Ton Rated @ 2500 PSI, 14" Diameter Ram, 25" x 27" ELECTRIC PLATENS, 12" STROKE, 3.5" PUSH BACK CYLINDERS, As is. Priced to Sell

2- Alike 18" x 18" Rubber Lab Press, Electric Platens, 100 Ton, NEW Self Contained 7.5 HP Hydraulic unit.480 Volts/ 3Phs. All new push buttons

16" X 16" PHI Press, 50 Ton, Electric Platens, 12" Daylight, New West 6100 Temperature controllers, Hand Pump Hydraulic, Good Condition

PHI Lab Press, 50 Ton Capacity Hand Pump, 15" x 15" Electric Platens, 2- New West 6100 Digital Controls, 240 Volts/1Ph,

36" X 36" Adamson Press,Steam Platens, 24" RAM, 4 Post, 2 Push Back Cylinders, 20" Daylight, 56" Working Height, 99" Total Height, 7.5HP Hydraulic Unit, All in Very good Condition.

1000 Ton Slab Side Press, 36" Ram, 1-only 42" x 42" Hot oil Platen, 45" between Slab Sides, 36" Daylight, Total Height 133", Incomplete Hydraulic power unit goes wit Press.

4 1/2"Kobelco Stewart Bolling PLastics Drop Extruder, Machine # 10..91 14272, Heavy Duty Hopper Stuffer, Feed Section 9" x 14.5", Quick opening Strain Die Head, 4.5" x 56" Screw and Extra Screw, 60 HP, 550 Volt Motor, 1750/2400 RPM, Lufkin Gear Box, Size BL-EX-6, Hydraulic Unit, All Controls* Excellent Condition

Monsanto R 100 Rheometer, Tech Pro Digital Temperature Controls, Therm O Logger Chart Recorder, 120 Volts, Tested and in Excellent condition, All Cables and Manual included, Ready to ship

Eagle HT Digital Temperature Controls for Rheometers, and Mooneys. New Temperature Probes. AC 115V/120V/-60Hz

Monsanto T-10 Load Cell, 2,200 lbf. Tension Excellent Condition

Monsanto R 100 Rheometer ODR Monsanto Therm0-Logger Recorder, all cables and Manual 120 Volts /1 ph / 60 hz / 20 Amps

Monsanto Rheometer R-100,110V/15A/60HZ/1PH, Cables, Operating Manuals, Therm-O Logger recorder or New Computer & ALPHA Software offered Separatly, Excellent Condition.

Monsanto R-100 Rheometer with Thermologger Recorder, Tech Pro Digital Temperature Controller All Cables and Manuals, Rheometer has been tested and is in very good condition.

VMI-AZ 70 MM Extruder, Gmbh-VMI Group, Type MCTD 70 mm, Order 1.94.052, Unit # 588, 12/1 L/D, Hydraulic Drive Power Roll Feed, Reliance RPM AC 60 Hp Motor, 460 Vols,3 ph, 60 Htz, 77 amps, 1725 RPM-Max safe Speed 5000 RPM New in 1995

VMI-AZ 120 mm extruder, Gmbh-VMI Group, Type MCTD 120 mm, 12/1 L/D, Order 1.94.053, Unit 598, Hydraulic Drive Power Roll Feed, Reliance RPM AC 100 Hp Motor, 460/Volts/60Htz/3ph Extruder was New in 1995, Excellent Condition

4 1/2" NRM Extruder

10 Hole Aluminum Aging Block Ovens, Model 10-2H, West 6100 Digital Controller, Preset High Temperature Safety Overload, 110 Volts. 10 Test Tubes and Corks. Testing for Both ASTM D-471 for Liquid Aging, and ASTM D-865 for Air Aging, In Stock Ready to ship.

New "west 6100" Digital Temp. Controller New preset High Temp. Safety Overload All New Wiring, High Temp. Insulation 220 Volts, 1 Ph, 20 Amps. 28 New Test Tubes and Corks Included Can test for Both ASTM D-471, liquid aging, and ASTM D-865. EXCELLENT CONDITION

Westinghouse Two Speed Motor, 300/150 HP, 890/445 RPM, 460 Volts, 3 phase, 60 Hz, 370 Amps, Type CS, Class F, Code G/J, S.F. 1.15, Model #71F13813, Serial # 08238801, Frame Type 686.5S, Overall Dimensions: 64" F/B X 64" R/L X 45" Tall, Approx Wt. 5000 lbs.

WEATINGHOUSE 400 HP MOTOR, RPM 585, 460 Volts,3 Ph, 60 Hz, Frame 6806L, Code-F, 1.15 Service Factor, Model HS DP, REBUILT NEVER USED, READY TO SHIP